The DJI Agras MG-1 is available with support from OmniView Tech.
We provide an end-to-end solution for integrating the MG-1 into your existing operations. Please contact to speak with our Industrial UAV team.
The DJI Agras MG-1 is an octocopter designed for precision variable rate application of liquid pesticides, fertilizers and herbicides, bringing new levels of efficiency and manageability to the agricultural sector.
Payload Capacity up to 10kg liquid payloads including pesticides, fertilizers, herbicides
Speed and power 40-60x Faster than manual spraying operations
Cover 7-10 Acres Per Hour of operation, cover area of 4000-6000m²
Foldable Designallows for Stow-And-Go and simple transportation
Reliability and Longevity: Triple Filter System and Centrifugal Cooling System
Accurate Spraying is achieveing with interchangeable nozzles, atomized spraying, and all-round spraying
The MG-1 has 4 application nozzles that have been placed below the motors
Real-Time Safety Features empty tank warning, operation resumption, system data protection
Microwave Radar utilized with the MG-1 Intelligent Flight Control system
Terrain Follow scans the terrain below in real-time, adjusts constantly to maintain height above crops
Dedicated Remote Controller featuring Lightbridge 2 transmission system ultra low-latency
Ready To Fly: everything you need to fly included, pre-tested by our experienced technicians
The powerful propulsion system enables the MG-1 to carry up to 10kg of liquid payloads, including pesticide and fertilizer. The combination of speed and power means that an area of 4,000-6,000 m² can be covered in just 10 minutes, or 40 to 60 times faster than manual spraying operations. The intelligent spraying system automatically adjusts its spray according to the flying speed so that an even spray is always applied. This way, the amount of pesticide or fertilizer is precisely regulated to avoid pollution and economize operations.
RELIABILITY AND LONGEVITY
Equipment used in plant protection operations is susceptible to dust and corrosion, leading to high cost of maintenance and shortened lifespans. To counteract degradation, the MG-1 is designed with a sealed body and an efficient, integrated centrifugal cooling system. As it flies, the surrounding air enters the aircraft body via the front inlet, equipped with a triple filter system that keeps dust and particulate matter from entering. The air then passes through each of the aircraft’s arms to the motors, capturing heat from all components and the entire structure before exiting and dissipating the heat to the surrounding air. The combination of cooling and filtering increases the expected lifespan of each motor by up to three times.
Spray nozzles can be chosen according to the properties of each liquid to optimize atomization, energy efficiency and the amount of liquid sprayed. The included nozzle is resistant to wear and can be used for thousands of hours of effective spraying without degradation. In total, the MG-1 has four nozzles, each placed directly below a motor. The downward airflow generated by the propellers accelerates the spray, increasing its reach.
EASE OF USE
The advanced flight controller integrated with the aircraft instantly and precisely responds to the pilot’s input. Choose between three flight modes: Smart mode, Manual Plus Mode and Manual mode, according to terrain and the specific needs of each mission.
Under Smart mode, the flight can be easily planned with the press of a few buttons, without the need for mapping knowledge or other software, making the MG-1 not only the most efficient but also the most easy to use spraying solution. In Manual Plus Mode, the aircraft performs the same turns at the press of a button as it does automatically under the Smart mode, allowing for planning to be done on the fly for fields of irregular shape. Under Manual mode, the pilot freely navigates the aircraft.
The MG-1 automatically records its current and remembers its past coordinates as it makes its way across the field. In case the operation is interrupted, for example due to depleted battery or spraying liquid, flight easily be resumed from the last point in its memory after changing the battery or refilling its tank.
The MG-1 design is based on a Y-type folding structure that can be installed without the use of any additional tools. Motor arms fold inwards making the aircraft compact and easy to transport, for example in the trunk of a car. Made from high-strength carbon fiber materials, the body frame is light yet durable and able to withstand the harshest conditions.
By integrating a microwave radar together with the MG-1's intelligent flight control system, the aircraft is able to scan the below terrain in real-time, and adjust to keep a constant, centimeter accurate, height above crops. Spray density is maintained even as the terrain rises and drops, so that the optimal amount of liquid is applied at all times.
DEDICATED REMOTE CONTROLLER
The dedicated remote controller is equipped with the latest Lightbridge 2 transmission system which enables ultra low-latency controls. Like the aircraft body, the remote is designed with water and dust protection. A special low-energy display panel gives real-time flight information and is able to last over extended periods of time on a single charge. Together with the highly responsive joysticks and convenient function keys, mastering the art of agricultural spraying is made easier than ever before.
Frame Arm Length
1471mm x 1471mm x 482mm (arm unfolded, without propellers)
780mm x 780mm x 482mm (arm folded)
60mm x 10 mm
Weight (with cooling fan)
High-performance engineered plastics
Diameter / Pitch
21x7.0 inch (533x178 mm)
Max Allowable Current (Continuous)
30 to 450 Hz
Drive PWM Frequency
Standard Operating Payload
Max Battery Size
151mm x 195mm x 70mm
Max Spray Speed
0.43 L/min (per nozzle, for water)
4 - 6 m (4 nozzles, 1.5 – 3 m above the crops)
XR11001: 130~250 μm
*Droplet size may vary according to operation environment and spraying speed.
Total Weight (without batteries)
Standard Takeoff Weight
Max Takeoff Weight
24.5 kg (@ sea level)
Max Thrust-Weight Ratio
1.81 (with 22.5 kg takeoff weight)
DJI Designated Battery (MG-12000)
Max Power Consumption
Hovering Power Consumption
3250 W (with 22.5 kg takeoff weight)
24 min (@ with 12.5 kg takeoff weight)
10 min (@ with 22.5 kg takeoff weight)
Max Operating Speed
Max Flying Speed
Recommended Operating Temperature
0 to 40℃
GL690B（Japan Only）, GL658C
2.400 - 2.483 GHz
Max Transmission Range (unobstructed, free of interference)
100 mW @ 2.4 GHz
6000 mAh, 2S LiPo
Operating Temperature Range
-10 to 40℃
Storage Temperature Range
Less than 3 months: -20 to 45℃
More than 3 months: 22 to 28℃
Charge Temperature Range
0 to 40℃
REMOTE CONTROLLER CHARGER
Base Package Includes:
Please note that the battery and charger must be purchased separately.