Inspire 1 With Zenmuse X3 Camera Plus Accessories and Carry Case - AS IS


Inspire 1 With Zenmuse X3 Camera Plus Accessories and Carry Case-AS IS

Item #99202

 

As is: After the Certified Pre-Owned inspection, our technicians found some work that needs to be done on the product. Specifically: 

  • 3 Landing Gears Broken, needs to be replaced (Cost= $251 plus tax)

 

INCLUDES:

  • Inspire 1 Drone x 1
  • TB47 Batteries x 3
  • X3 Camera x 1 
  • Remote Controller x 1
  • Inspire 1 1345T Propellers x 1 (full set)
  • ND Lens filter x 4 
  • Inspire 1 Charger x 1
  • DJI Inspire 1 Backpack Suitcase with Sleeve
  • Ipad 7.9" Cover
  • Propeller Sleeve x 4

Overview

CREATIVITY UNLEASHED

ADVANCED, READY-TO-FLY DESIGN

Imagine holding the future in your hands. Designed to be powerful while lightweight, flexible while providing the stability you need, the Inspire 1 is DJI’s most advanced complete package. All of the latest aerial technology is packed into one simple, ready-to-fly system, putting you in the sky within minutes.

 

AERODYNAMIC, TRANSFORMING DESIGN

Carbon fiber arms give you the strength to maneuver in the air and they transform, moving out of the camera’s way at the flick of a switch. With a full 360⁰ unobstructed view, you now have the freedom to capture shots independent of the direction you are flying.

 

CURVED MAGNETS

Brushless motors pioneered by DJI are now the standard in the multirotor industry. But the Inspire 1 takes the next step in brushless development by integrating curved magnets that fit flush around the edge of each motor. Although much more difficult to produce, these magnets eliminate airflow gaps within the motor, greatly increasing efficiency.

Inspire 1

SINGLE-WIRE DESIGN

Several strands of copper wire have been replaced by a single, dense strand. Reducing the wasted space between wires results in more copper within each motor, providing more power and less resistance. A centrifugal pump increases airflow inside the neat, tight copper windings dissipating heat much faster while greatly increasing the life of the motors.

NEW ESCS

The revolutionary Electronic Speed Controllers (ESC) with sinusoidal drive replaces the square wave drive of traditional ESCs redefining the whole drive system. The patented algorithm in the ESCs have been tuned and customized specifically for the Inspire 1 offering features such as closed loop torque control and distinct functional redundancy with the highest efficiency and the most reliability.

Inspire 1

INTELLIGENT POWER MANAGEMENT SYSTEM

A fully integrated intelligent battery powers your Inspire 1 and virtually manages itself.

When in flight, your remaining battery power is shown live, letting you know how long you can continue to fly. Advanced algorithms calculate the distance of your aircraft and estimated time to return home, letting you know when it’s time to fly back.

The battery reports the voltage of each cell, the total lifetime charges and discharges, and the overall health and battery status. All this helps you keep your Inspire 1 in the air and flying for years to come.

Inspire 1

POSITIONING

As it flies, the position of your Inspire 1 is constantly updated and recorded using a high-strength, intelligent GLONASS + GPS system. This dual positioning system enables higher precision and quicker satellite acquisition, allowing you to see where the aircraft is on a live map and giving it a point to hover at when you release the controls.

Inspire 1

MAIN CONTROLLER

This is the "brain" of the entire system, receiving thousands of bits of data every second and translating that data into action as you fly. The Main Controller tells every part of your Inspire 1 what to do, calculates environmental conditions in real-time, and ensures that the aircraft responds to your control commands instantly.

Inspire 1

IMU

Automatically keeping the Inspire 1 stable and steady during flight only looks easy, as DJI’s advanced Inertial Measurement Unit (IMU) handles everything. The IMU incorporates both a 6-axis gyroscope and an accelerometer to monitor miniscule changes in tilt and movement. This allows the aircraft to compensate and adjust immediately, holding its position at all times.

Inspire 1

FAILSAFE

All of these features combine to put your Inspire 1 on autopilot when needed. If the battery runs low or connection with your remote controller is lost, the Inspire 1 uses its positioning system and smart flight technology to return back to you.

Inspire 1

HOVER IN PLACE WITHOUT GPS

You can take off and land at the press of a button and keep your Inspire 1 steady indoors or when GPS satellites can’t be acquired with the new DJI Vision Positioning System.

Inspire 1

COMBINED VISUAL DATA AND SONAR WAVES

DJI built the Vision Positioning System from the ground up, customizing it to meet the rigorous requirements in place for anything that handles position holding on our flying platforms.

This system combines visual data and sonar waves in a single unit, detecting both variance in patterns on the ground and current altitude. With this information, your Inspire 1 can hover in place and automatically raise or lower its arms as you liftoff or descend to the ground.

Inspire 1

THE CPU CHIP

But the sonar and visual information is just one half of the fully integrated package: processing this information is handled by a dedicated CPU chip. This chip takes in feedback and outputs data in real-time, and is intelligent enough to distinguish between objects and ground patterns. All of this data is given to your Inspire 1’s flight controller, which in turn communicates with the entire aircraft.

ZENMUSE X3

  • 4K VIDEOS
  • 12MP
  • 360⁰ RANGE
  • 3-AXIS GIMBAL
  • 1/2.3” sensor
  • Record at 4096 × 2160 (25fps) or1920 × 1080 (60fps)
  • 12MP photographs
  • 9 element rectilinear wide angle lens

AIRCRAFT SPECIFICATIONS

Model T600
Weight 6.27 lbs (2845 g, including propellers and battery, without gimbal and camera)
6.74 lbs (3060 g, including propellers, battery and Zenmuse X3)
GPS Hovering Accuracy Vertical: ±1.64 feet (0.5 m)
Horizontal: ±8.20 feet (2.5 m)
Max Angular Velocity Pitch: 300°/s
Yaw: 150°/s
Max Tilt Angle 35°
Max Ascent Speed 16.4 ft/s (5 m/s)
Max Descent Speed 13.1 ft/s (4 m/s)
Max Speed 49 mph or 79 kph (ATTI mode, no wind)
Max Takeoff Sea Level 1.55 mi (2500 m)
2.8 mi (4500 m with specially-designed propeller)
Max Wind Speed Resistance 10 m/s
Max Flight Time Approx. 18 min
Motor Model DJI 3510H
Propeller Model DJI 1345T
Indoor Hovering Enabled by default
Operating Temperature 14° to 104° F (-10° to 40° C)
Diagonal Distance(propeller excluded) 22.8 inch (581 mm, Landing Mode)
Max Takeoff Weight 7.71 lbs(3500 g)

REMOTE CONTROLLER

Model GL658A
Operating Frequency 922.7-927.7 MHz (Japan Only)
5.725-5.825 GHz
2.400-2.483 GHz
Max Transmitting Distance(unobstructed, free of interference) Up to 5 km or 3.1 miles when FCC compliant
Up to 3.5 km or 2.1 miles when CE compliant
Up to 2 km or 1.2 miles when MIC compliant
EIRP 10dBm@900m, 13dBm@5.8G, 20dBm@2.4G
Video Output Ports USB, mini-HDMI
Power Supply Built-in battery
Charging DJI charger
Dual User Capability Host-and-Slave connection
Mobile Device Holder Tablet or Smart Phone
Max Mobile Device Width 170mm
Output Power 9 W
Operating Temperature 14° to 104° F (-10° to 40° C)
Storage Temperature Less than 3 months: -4° to 113° F (-20° to 45° C)
More than 3 months: 72° to 82° F (22° to 28° C)
Charging Temperature 32° to 104° F (0° to 40° C)
Battery 6000mAh 2S LiPo

CHARGER

Model A14-100P1A
Voltage 26.3 V
Rated Power 100 W

BATTERY (OPTIONAL)

Name Intelligent Flight Battery
Model TB48
Capacity 5700 mAh
Voltage 22.8 V
Battery Type LiPo 6S
Energy 129.96 Wh
Net Weight 670 g
Operating Temperature Range 14° to 104° F (-10° to 40° C)
Storage Temperature Range Less than 3 months: -4° to 113° F (-20° to 45° C)
More than 3 months: 72° to 82° F (22° to 28° C)
Charging Temperature Range 32° to 104° F (0° to 40° C)
Max Charging Power 180 W

APP

Name DJI GO
Mobile Device System Requirements iOS 8.0 or later, Android 4.1.2 or later
Supported Mobile Devices iOS: iPhone 5s, iPhone 6, iPhone 6 Plus, iPhone 6s, iPhone 6s Plus, iPhone 7, iPhone 7 Plus, iPod touch 6, iPad Pro, iPad Air, iPad Air Wi-Fi + Cellular, iPad mini 2, iPad mini 2 Wi-Fi + Cellular, iPad Air 2, iPad Air 2 Wi-Fi + Cellular, iPad mini 3, iPad mini 3 Wi-Fi + Cellular, iPad mini 4, and iPad mini 4 Wi-Fi + Cellular.
This app is optimized for iPhone 7 and iPhone 7 Plus.
Android: Samsung tabs 705c, Samsung S6, Samsung S5, Samsung NOTE4, Samsung NOTE3, Google Nexus 9, Google Nexus 7 II, Ascend Mate7, Huawei Mate 8, Nubia Z7 mini, SONY Xperia Z3, MI 3, MI PAD.

*Support for additional devices available as testing and development continues.


GIMBAL

Model ZENMUSE X3
ZENMUSE X5(optional)
ZENMUSE X5R(optional)
ZENMUSE XT(optional)
ZENMUSE Z3(optional)
Angular Vibration Range ±0.03°
Interface Type Detachable
Controllable Range Pitch: -90° to +30°
Pan: ±320°
Mechanical Range Pitch: -125° to +45°
Pan: ±330°
Max Controllable Speed Pitch: 120°/s
Pan: 180°/s

CAMERA

Name X3
Model FC350
Total Pixels 12.76M
Effective Pixels 12.4M
Image Max Size 4000x3000
ISO Range 100-3200 (video)
100-1600 (photo)
Electronic Shutter Speed 8s - 1/8000s
FOV (Field of View) 94°
CMOS 1/2.3” CMOS
Lens 20mm (35mm format equivalent)f/2.8 focus at ∞
9 Elements in 9 groups
Anti-distortion
Still Photography Modes Single shoot
Burst shooting: 3/5/7 frames
Auto Exposure Bracketing (AEB): 3/5 bracketed frames at 0.7EV Bias
Time-lapse
Video Recording Modes UHD (4K): 4096x2160p24/25, 3840x2160p24/25/30
FHD: 1920x1080p24/25/30/48/50/60
HD: 1280x720p24/25/30/48/50/60
Max Bitrate of Video Storage 60 Mbps
Supported File Formats FAT32/exFAT
Photo: JPEG, DNG
Video: MP4/MOV (MPEG-4 AVC/H.264)
Supported SD Card Types Micro SD
Max capacity: 64 GB. Class 10 or UHS-1 rating required.
Operating Temperature Range 0° to 40° C

BATTERY (STANDARD)

Name Intelligent Flight Battery
Model TB47
Capacity 4500 mAh
Voltage 22.2 V
Battery Type LiPo 6S
Energy 99.9 Wh
Net Weight 570 g
Operating Temperature 14° to 104° F (-10° to 40° C)
Storage Temperature Less than 3 months: -4° to 113° F (-20° to 45° C)
More than 3 months: 72° to 82° F (22° to 28° C)
Charging Temperature 32° to 104° F (0° to 40° C)
Max Charging Power 180 W

DOWNWARD VISION SYSTEM

Velocity Range <26.2 ft/s (8 m/s) at height of 6.56 feet (2 m)
Altitude Range 5-500 cm
Operating Environment Surfaces with clear patterns and adequate lighting (> 15 lux)
Operating Range <9.8 feet (3 m)
Ultrasonic Sensor Operating Range 0.17-16.4 feet (5-500 cm)
Ultrasonic Sensor Operating Environment Non-absorbing material, rigid surface (thick indoor carpeting will reduce performance)
imovie The Inspire 1has been certified by Apple in their Works with iMovie and Works with Final Cut Pro X programs, so you can edit 4K without worry whether you are a professional or shooting for fun.
hdmi

Be part of the OVT Family

BE PART OF THE OVT FAMILY