TBS VENDETTA BACKPACK BUNDLE
READY TO FLY BUNDLE
The Team BlackSheep Vendetta Bundle includes everything you need to get started in the world of Drone Racing. Experience the thrill of flying the 240-sized FPV Racer in as little as 5 minutes from box opening. Everything is fully configurable via the OSD on the Tango Remote Control - No PC required. The included TBS Tango R/C Radio Controller has a 40CH high performance video receiver to deliver clear FPV video over long ranges.
With this kit you will receive: the TBS Vendetta frame, ZeroZero FPV Camera, Extended Battery, Charger, TBS Tango Remote Control with OSD/FPV Monitor, 4 Spare Props, 2 Spare Arms, Tool Kit, and Backpack
CARBON FIBER CONSTRUCTION
All structural parts on the TBS VENDETTA are made out of custom-made carbon fiber layup. The arms are made from flat 3.5mm thick carbon fiber plates, machined to precise standards on a 4-axis CNC machine, fully chamfered to prevent delamination. The body is a pure work of art, which starts its life as a hand molded tubular 2mm carbon fiber master. It is trimmed down by a 4-axis CNC machine to save weight. Smooth and rounded edges in the CNC cuts are our way of showing off. The matte finish is sand blasted, because attention to detail requires it.
MODULAR DESIGN - NO SOLDERING REQUIRED
The entire FPV racer is built around the idea of countless self-contained parts working together hand in hand for a unified user experience. Starting from the TBS ZeroZero FPV camera, to the TBS POWERCUBE and TBS CORE PRO, everything is repairable without a soldering iron, and with just two tools. This does not prevent you from configuring all tuning parameters via the built-in OSD, to changing VTx channels or power levels.
READY TO FLY TIME: 5 MINUTES
The TBS VENDETTA comes pre-tuned, and the R/C Calibration Wizard takes you through the setup steps. Just strap in a R/C receiver, tune your goggles to BOSCAM A CH1, and start setting up your controls (goggles are sold separately). The arms arrive in detached state to allow quick access to the R/C receiver bay the first time.
BUILT WITH CUSTOMIZATION IN MIND
From the structural rigidity to the over-powered ESCs, everything has been developed with your progress as a pilot in mind. A step to 6S with bigger motors to gain ridiculous power-to-weight ratios, custom arms for higher efficiency motors and props, or simply a different motor setup to suit your tastes are easily possible, thanks to the MT30 connectors and the quick swap arms. You can even carry different pairs of arms with unique motor and props combos installed for every occasion, and mount what you fancy!
TBS TANGO FPV/OSD R/C RADIO CONTROLLER
The Tango comes pre-programmed for all modern flight controls, with 10CH it provides plenty of capability even for moderately sized filming rigs, while being a perfect match for FPV racers. Multiple arming/disarming and mode switches, with pan / tilt gimbal controls.
Flying from the screen is not necessary, but possible thanks to special anti-glare and anti-reflective coating. The 40CH video receiver is precisely tuned to its environment delivering unparalleled range. The built-in receiver antenna covers 180 degrees in forward facing direction. Using the proprietary "TBS Port", you can connect any goggles to the Tango, delivering crystal-clear video reception as well as long-lasting power, without needing external batteries.
- 240-sized RTF FPV Racer
- Quick-replace 3.5mm carbon fiber arms, MT30 connectors
- Cobra CM2204/2300kV Motors, HQ 5x4x3 Props
- TBS PowerCube with fastest F3 board available, 2-6S capable Bulletproof 30/50A ESCs
- Compatible with PPM, SBUS, XBUS, Spektrum R/C systems
- Fully configurable via OSD, no PC required
- GoPro 3/4 and Mobius / Runcam mount included, both 10 and 30 degree variations
- Lost model alarm
- 410g weight without Battery or HD camera